Tag Archive: Tamiya 1/35 Jagdpanther (Sd.Kfz. 173) Late Version Kit# 35203


Tamiya 1/35 Jagdpanther (Sd.Kfz. 173) Late Version Kit# 35203

  The Pictures

 

 

 

 

 

 

 

 

 

Advertisements

 

Tamiya 1/35 Jagdpanther (Sd.Kfz. 173) Late Version Kit# 35203

The Build

The kit itself appears to be very crisp in detail,not many parts,but they looked clean and I test fitted several of the main panel sections. The areas that obviously stood out to me was,those god awful “rubber band tracks”, the barrel with the seam that travels along the whole length of the barrel, after you glue the two halves together,and the absence of engine screens. The decals are rather lifeless.

I went ahead and started with the wheel assembly,lower tub,rear panel, they went together very nice, the running wheels didn’t look that bad,had some nice details in the bolt pattern. I went ahead and prepped and painted the lower tub ,and painted the wheels using a circle template you get at any art store.

I then attached all the road weels,left and idler and drive sprocket to rotate for easier acceses for installing the tracks. I had to do this one on a budget, after getting their coat of black primer, then some gray , I sprayed a gloss clear coat ,so the next day I can apply a wash of AK’s track rust. I let dry for a day then applied a light European earth pigment and dry brushed it with MIG pigments gun metal,and some Model Master Enamel Silver.

When that was dry I installed the two sections of track that were alreay connected using cyanoacrylate. Carefully working around the idler and drive sprockets,it went very nicely. Did some weathering inside the road wheel assembly with oils and pigments, before it got to cramped inside the wheel compartment.

I next mounted the upper hull assembly and the clumsy looking 88 was replaced by a aftermarket barrel from RB Models, a company in Checkoslovaia who does kick ass work for a reasonable price,even with shipping.

Now that everthing is coming together left only the small parts like tools,hatches,handles,exhaust, photo etched motor and heater intake grills.

Now for the Prepping ,Primer and Paint. I first sprayed a mixture of Vallejo Acrylic German Red Brown and Black for the primer coat. I then used MIG Ammo Dunkelgelb dark base and Dunkelgelb base for the lower halves,and Dunkelgelb Light Base for the upper halves. These were paints that I have from the Dunkelgelb Modulation Set.

I then sprayed AK Acrylic Olivgrun , and Rotbraun I pulled from the “Olivgrun and Rotbraunn Modulation Set”, from AK.
I was able to apply the modulation process with all three camo colors. After a day and a half of letting the acrylic gloss clear coat dry enough to continue with the project.

Much of the tools were painted off the vehicle,as well as the two cables on each side. By the way the plastic cable from the kit was cut off and each eyelet had a small hole drilled with a pin vise,and installed a thick thread into each end with a little cyanoacrylate. It worked out just great. I mounted them ,and applied the wash, I used several types and brands to get the effect I wanted. Then on with the chipping, and some pigments, and did a final walk around,and I was pleased.

Tamiya 1/35 Jagdpanther (Sd.Kfz. 173) Late Version Kit# 35203

The Kit

This kit, which was first produced in 1996, corresponds to the basis of the 35174 and 35176 kits, which are also available.

As with the Panther and Panzer III kits already presented on model versions, all components are also sprayed cleanly and burr-free in this kit.

Again, only a few ejection points in later visible areas are given a little more attention. As usual, detailing and accuracy are still good, despite the “high” age of this kit. n the body of the degree of integration is relatively high, and the ease of the fitting of parts. The body of the welding wire and cutting marks are very beautiful. The details of the wheels, such as road and drive wheels are very crisp.

The tracks are that of Tamiya’s rubber band one piece conctruction,which are relatively nice,but not exceptional. No photo etched parts are included,and the gun barrel seems to be rather clumsy looking, so I purchased a aftermarket barrel and muzzle from R/B models from Eastern Europe and engine screens from Tamiya.

Overall the kit went together very nicely, and sections fitted very easily together. Again the detail,remember this is Tamiya, is excellent.
Both for beginners and advanced model builders they can create a very accurate model.

 

Tamiya 1/35 Jagdpanther Late 

                                                       History

The Jagdpanther (German: “hunting panther”) was a tank destroyer built by Germany during World War II based on the chassis of the Panther tank. It entered service in 1944 during the later stages of the war on the Eastern and Western Fronts. The Jagdpanther combined the 8.8 cm KwK 43 cannon of the Tiger II and the armor and suspension of the Panther chassis.

It was planned that production will reach and output of 150 vehicles per month, but the highest output was in January of 1945, when 72 were produced. Overall from December of 1943 to March of 1945, only 392 were produced. The total number of Jagdpanthers produced was a direct result of Allied bomber raids, which caused much destruction and disruption at the two production centers.

The Jagdpanther was armed with excellent, long barrelled 88mm Pak 43/3 L/71 gun (similar to that used on Tiger II) and single 7.92mm MG34 or MG42 machine gun mounted in the same ball mount as Panther Ausf A. The 88mm gun was fitted with Sfl.Z.F.1a (5×8) gun sight and was capable of destroying enemy tanks at ranges of 3000 meters. Both weapons were mounted in a well-sloped frontal plate (80mm at 55 degrees). The main 88mm gun was protected by massive 100mm “saukopf” (pig’s head) type mantlet.

It was powered by a 12 cylinder Maybach HL 230 P30 23.1 liter V12 gasoline engine, which would give it an effective range of 160 km (1000 miles) and a top speed of 46km/h (28.6 mph), making it as fast as contemporary Allied medium tanks such as the M4 Sherman, despite the latter weighing 15.000 kg (33070 lbs) less.

Two main variants can be distinguished, the earlier (1944 model) G1 with a small internally bolted main gun mantlet and a modified Panther A engine deck, and the later (1945 model) G2 with a larger simplified, outside-bolted mantlet and a modified Panther G engine deck, though late G1s also had the larger mantlet. Early Jagdpanthers had two vision openings for the driver, whereas late versions had only one. The main gun originally had a monobloc gun barrel, but later versions were equipped with the Pak 43/4 gun with a two-part barrel.

Jagdpanthers equipped heavy antitank battalions (schwere Panzerjäger-Abteilung) and served mainly on the Eastern Front.[1] In the West, they were first encountered in very small numbers late in the Battle of Normandy, where the German 654 schwere Panzerjäger-Abteilung (“654th Heavy Antitank Battalion”) deployed about 12 Jagdpanthers against British units. Later, significant numbers were concentrated in the West for the Ardennes Offensive.

 

Plastic Models... By CharleyGnarly

Just a regular Joe, sharing tips and such for other regular Joes and Janes.

amateur airplanes

Let's build.

fossiljellyfish

Random thoughts of a random fellow

Adopt a Model

eyvallah beğenene, beğenmeyenin canı cehenneme

ExcentRich Armour

The mini site about miniature armour!

ThisbeRich

Amateur Miniature Models!

MSC Review Connect

Reviews for the Modelling Community