In this photo set it shows the finished application of Testors Model Master Enamels by brush,and the application of the kit’s decals. Obviously I chose the markings of one of  the support tanks   of  s.Pz.Abt. 502  Tiger Battalion near Leningrad in 1943.  After a day or two, I applied a coat of Testors Model Master  High Gloss Clear Enamel and  let dry for two full days.  After two days I was able to handle it without causing any print marks.  There is when I applied Flouquil   Flat Black Enamel to the tires. I thinned it  out enough to apply the paint with O size brush and  let the capillary  action do the work. By doing this method it leaves the running wheels and small upper support wheels nice and clean. I Then applied MIG Productions Dark Wash to the track and some parts of the rubber. This took me about three applications for what I was looking for. Today I  applied a light wash of  MIG Productions Brown Wash on the bottom hull and underneath  as well. Still wet, I sprinkled some #4 from the Rustall  Set, It gives a natural earth and rock look.